Hinds County

Epoxy Floors in Jackson, MS

10X Epoxy is based in Jackson, and the city's slabs range from mid-century pours in Belhaven and Fondren to newer builds at the north and south ends. Whatever the age, we start by finding out what the concrete is carrying before anything goes on it.

Get a free estimate Call (769) 200-4539

Workmanship guaranteeEvery floor we install
Open 24 hoursCall (769) 200-4539 any time
Owner on the jobKen Covington, owner
Written estimatesMeasured and priced on site

Jackson is the Hinds County seat and the state capital, and it is where I-55 and I-20 meet, so most of the metro is a short drive from here. That makes Jackson the easiest place for us to schedule an estimate visit, including early or late in the day.

Older Jackson slabs tend to arrive with a history: hairline cracks, oil spots under where the car has sat for years, and old paint or sealer from a past owner. None of that rules out a coated floor. It just means the prep matters more than the product.

What older Jackson slabs need first

A coating bonds to clean, open concrete, not to whatever is sitting on top of it. On an older slab we diamond grind to remove old sealer, paint and the surface film that oil leaves behind, then fill cracks so they do not telegraph through the finish. Skipping that step is the usual reason a coating lifts or peels.

Old paint and sealer ground off, not coated over
Oil stained areas opened up so the coating can grip
Cracks filled and ground flush before coating

Yazoo clay and slab movement

Much of Jackson sits on Yazoo clay, which swells when wet and shrinks when dry. Slabs here move more than in many parts of the country, and that movement is what opens the cracks you see in a lot of garages. We look at crack pattern and moisture during the estimate visit so you know what the floor can and cannot hide.

Shops, storefronts and warehouse floors

Jackson also has a large stock of older commercial buildings. For a shop or storefront, commercial floor coating gives a surface that cleans easily and stands up to traffic, and concrete floor polishing suits spaces that need to stay open, since a polished floor is usually back in use the same day.

Questions from Jackson

Can you coat a garage floor that already has old paint on it?

Yes, but the paint comes off first. We diamond grind down to bare concrete, because a new coating is only as strong as the layer it sits on.

Will cracks in my Jackson slab come back through the coating?

Cracks are filled and ground flush before coating. If a slab is still actively moving on clay soil, we will tell you that at the estimate visit rather than promise it away.

Do you serve all of Jackson?

Yes, Jackson is our home base. See the full list on our service areas page, or book a free written estimate.

Every floor in Jackson carries our workmanship guarantee, and every estimate is free and in writing.